Haas ST-10 CNC Horizontal Lathe Turning Center with Chip Conveyor

Capacities

Chuck Size: 6.5 in

Max Part Swing: 16.5 in

Max Cutting Diameter (with BOT turret): 12.00 in

Max Cutting Diameter (with BMT45 turret): 11.00 in

Max Cutting Diameter (with VDI turret): 6.80 in

Max Cutting Length (varies with workholding): 16.0 in

Bar Capacity: 1.75 in

Travels specifications

X Axis: 7.88 in

Z Axis: 16.00 in

Feedrates specifications

Rapids on X: 1200 ipm

Rapids on Z: 1200 ipm

Axis Motors specifications

Max Thrust X 3300 lbf

Max Thrust Z 3300 lbf

Spindle specifications

Spindle Nose: A2-5

Max Rating: 15.0 hp

Max Speed: 6000 rpm

Max Torque: 75.0 ft-lbf @ 1300 rpm

Spindle Bore ø: 2.31 in

Sub-Spindle specifications

Chuck Size: 5.3 in

Spindle Nose: A2-5

Max Speed: 6000 rpm

Max Sync Speed w/Main Spindle: 4800 rpm

Chuck Throat: Ø 1.30 in x 1.37 in DEEP

Drawbar Bore (NON-THROUGH): Ø 1.00 in x 4.50 in DEEP

Spindle Bore (without chuck and drawbar installed): 1.50 in

Integrated Brake Torque: 17 ft-lbf

Spindle Orientation Accuracy (Requires SO): ± 0.02 °

Rapids (B-axis): 400 ipm

Tailstock specifications

Taper: MT3

Hydraulic Quill Travel: 3.8 in

Manual Body Positioning: 20.0 in

Max Thrust (Hyd. Quill Only): 1130 lbf

Min Thrust (Hyd. Quill Only): 140 lbf

Turret specifications

Number of Tools: 12-Station BOT

OD vs ID Tools: Any Combination (will vary with turret)

Boring Bar Rear Clearance (from back of turret ): 0.75 in

General specifications

Coolant Capacity: 30 gal

Air Requirements specifications

Air Required†: 4 scfm @ 100 psi

Inline Air Hose: 3/8 in

Coupler (Air): 3/8 in

Air Pressure Min: 80 psi