NEW GoldPro® 180 mm X 250 mm Automatic Breakdown Rolling Mill Complete With Auto-Feed System, Model H25.SB Automatic 180mmx250
NEW GoldPro® 180 mm X 250 mm Automatic Breakdown Rolling Mill Complete With Auto-Feed System, Model H25.SB Automatic 180mmx250
Location:Pawtucket, RI
orCall 1-800-619-GOLD
Description
Gears:
Made from case hardened high tensile alloy steel forgings Ring gear in hardened and tempered steel Tooth gearing is evaluated to give an optimum balance between tooth beam strength and maximum durability rating based on the dimensions of the gear set. The planet gears are crown shaved to give an ideal loading along the teeth , and are carried on needle rollers mounted on case hardened pins .
Planetary carriers:
Of high quality cast iron for strength and rigidity, to ensure equal tooth loading in the planetary gearing.
SHAFTS:
Made from case hardened tensile alloy steel to be more resistant to bending and torsion stresses and to maintain proper support and alignment of all gears even under the most critical loading conditions.
HOUSINGS:
The gearbox casing is of high duty cast iron for strength and rigidity.GROUP with motorized and programmable centring guide in according with your plate width. With this system is possible adjust the guide by brushless motor and save the position in a program.
GROUP shearing machine:
The hydraulic guillotine machine is in stand-by position during the working cycle and at the last step comes in working position for cut the plate at a programmable length.
Technical Data:
Steel Construction
Rolls Caged in Normalized Steel
Main Reduction Gear Type Planetary
ROLLS support in steel with bronze bearing
MOTORIZED upper roll movement with Brushless motor
PNEUMATIC SYSTEM FOR INLET AND OUTLET PLATE FOR COMPLETELY AUTOMATIC WORKING CICLE, WHIT TOUCH SCREEN DISPLAY
COOLING SYSTEM ON ROLLS
LUBRIFICATION OF ROLLS SUPPORT IS FULL AUTOMATIC THROUGT MOTORISED PUMP AND INJECTORS.
SAFETY DEVICES IN ACORDING WITH C.E. RULES
ROLLS DIAMETER 180mm
CYLINDERS WIDTH 250mm
CHEMICAL COMPOSITION OF ROLLS:
C=0,89 MN=0,42 SI=0,19 P=0,013
S=0,004 CR=1,87 MO=0,26 V=0,17
FORGED ROLLS WITH HEAT TREATMENT IN SPECIAL STEEL; EACH ROLLS WILL BE EQUIPPED WITH A CERTIFICATE OF QUALITY AND WORK ATTEST
MAX WIDTH 80 mm
MIN BEGINNING LENGHT 700 mm
MIN BEGINNING LENGHT 700 mm
MIN. THICKENESS 0,80mm
ROLLS SPEED (ADJUSTABLE) from 0 to 20 m/minute
MAIN MOTOR IN ALTERNATE CURRENT 25HP
THEORETICAL WEIGHT 3300 KG
INSTRUCTION MANUAL IN ENGLISH LANGUAGE
Notes:
INCLUDED WORKING PLANE IN HARDENED STEEL AND GRINDING ROLLER
TABLE MOUNTED IN ALUMINIUM MAIN FRAME
Availability:
Ex-Factory, Italy
Price: € 255.000,00
Check the latest exchange rate
Listed price subject to manufacturers price increases without notice.
Specifications
Condition | New |
Stock Number | famorH25 |
CYLINDERS | HARDNED 66-67 HRC |
VOLTAGES | 400V/50Hz |
DIMENSIONS | 8960mm x 1777mm (3527in x 700in) |